Threat #1 GroupBox

The controls in this GroupBox control Threat #1.

Threat Type

Use the Threat Type ComboBox to pick the threat type. Types available are:

• HAF T-6A

Bearing

Use the Bearing EditBox to select the threat's heading relative to the ownship's heading at the closest point of approach.  Enter values between -180 and 0 or between 180 and 360 in order to make the threat approach from the left, or enter values between 0 and 180 to make the threat approach from the right.  Valid bearings are 0 to 360 or -180 to 180.

Relative Altitude

Use the Relative Altitude EditBox to select the threat's altitude relative to the ownship's altitude at the closest point of approach. Positive numbers mean the threat will pass over the ownship, negative below.

Distance

Use the Distance EditBox to select the threat's distance to the ownship at the closest point of approach. Positive numbers mean the threat will pass by the ownship's right wing, negative numbers left.

Time

Use the Time EditBox to select how much time it will take for the threat to pass by the ownship.

Start Position

Use the Start Position ComboBox to select the threats, relative to the ownship, starting altitude. The selections are:

• Above
• Level with
• Below

Speed

Use the Speed EditBox to select the threat's indicated airspeed.

Vertical Closure Rate

Use the Vertical Closure Rate EditBox to select the threat's rate-of-climb or rate-of-descent depending on whether Below or Above is selected in the Start Position ComboBox. This value is ignored if the Start Position is Level.

Enable PushButton

Use the Enable PushButton to enable or disable the threat.

Threat #2 GroupBox

The controls in this GroupBox control Threat #2. Refer to Threat #1.

Ground Hazards GroupBox

The controls in this GroupBox control all other visual hazards.

Type

Use the Type ComboBox to select the visual model to use. Models available are:

• Texan II
• Fire Truck
• Tug.

Hazard Path

Use the Hazard Path ComboBox to select what predefined route for the ground hazard to follow. These are defined by the visual system IG.

Hazard Enable

Use the Hazard EnablePushButton to enable or disable the ground hazard.

Pause Hazard

Use the Pause Hazard PushButton to pause the ground hazard.