Altitude GroupBox

Use the Up Arrow PushButton to increase the altitude of the aircraft.

Use the Down Arrow PushButton to decrease the altitude of the aircraft.

Use the EditBox to directly set the altitude of the aircraft.

The current altitude is shown above the EditBox.

Heading GroupBox

Use the Left Arrow PushButton to decrease the heading of the aircraft (counter-clockwise).

Use the Right Arrow PushButton to increase the heading of the aircraft (clockwise).

Use the EditBox to directly set the heading of the aircraft.

The current heading is shown above the EditBox.

Airspeed GroupBox

Use the EditBox to enter a desired calibrated airspeed. Then use the Change PushButton to cause the simulated aircraft to trim to that airspeed.

Position GroupBox

Use the Fore PushButton to move the aircraft forward.

Use the Aft PushButton to move the aircraft backwards.

Use the Left PushButton to move the aircraft to the left.

Use the Right PushButton to move the aircraft to the right.

Use the N PushButton to move the aircraft to the North.

Use the S PushButton to move the aircraft to the South.

Use the E PushButton to move the aircraft to the East.

Use the W PushButton to move the aircraft to the West.

Slew Rate GroupBox

Use the mutually exclusive Fixed or Variable RadioButtons to select the desired mode.

Fixed mode provides Low, Medium, and High RadioButtons for selecting the desired slew rate.

Variable mode provides a slider for setting the desired slew rate from slow to fast. Setting the slider all the way left sets the slew rate to zero and prevents the simulated aircraft from slewing.

The slew rates for Altitude, Heading, and Position are displayed at the bottom of the Slew Rate groupbox.